Monday, September 27, 2010

To Protect Our Environment(Choosing Your Refrigerant Now)

Air Conditioner Refrigerant

All of us have probably heard about the ozone layer which is located 35 miles above the ground. This upper layer of our earth's atmosphere protects the earth from the sun's ultraviolet rays by reflecting them back to space. UV rays are harmful to the plant, marine life and human beings on the earth.

How does air conditioner relate to the ozone layer? It was discovered in the mid 1980s that the commonly used air conditioner refrigerant has a damaging impact on the ozone layer. At that time, the refrigerants that used then were known as CFC(chlorofluorocarbons) and HCFCs(hydrochlorofluorocarbons). CFCs are a family of chemicals that contain chlorine, fluorine and carbon. The chlorine content in these compounds cause the depletion of the ozone layer.
This discovery prompted the signing of Montreal Protocol of 1987, an agreement signed by 180 nations that target to phase out the production of CFCs by 1995 and HCFCs by 2030. New refrigerants that are being used to replace these CFCs are HFCs(hydrofluorocarbons) and refrigerant blends(Azeotropic, Zeotropic). In summary, the 4 commonly used refrigerants that you can find today are:
CFCs
HCFCs
HFCs

Refrigerant blends
The future commonly used refrigerants will be in the last two categories. Among the currently widely used ones are R-134a, R407C and R410A.

CFC Refrigerants
These refrigerants were developed more than 70 years ago and are harmful to our respiratory systems and the ozone layer. Their production was stopped since 1995 but are still being used widely in existing residential air conditioning units as many equipments have a lifetime of up to 30 years. Today's refrigerants used are from reclaimed units that are no longer in operation. The common ones still used are:
R-11
R-12
R-113
R-114
R-115

HCFC Refrigerants
These air conditioner refrigerant is considered partially halogenated as they consists of methane or ethane in combination with chlorine and fluorine. They are shorter lifespan and are less destructive to the ozone layer compared to CFCs. They are an interim solution to a totally "free from chlorine" refrigerant that are being developed. Their production are scheduled to be phased out totally in 2030. The common ones used are:
R-22
R-123
R-22 is used extensively in residential, commercial and industrial applications.

The schedule of phaseout :
2015 - Production freeze and use limitations
2020 - Prohibited for new air conditioning and refrigeration use
2030 - Total phaseout

HFC Refrigerants
These air conditioner refrigerant contain no chlorine atom and is not destructive to the ozone layer though they have a slight effect on global warming. R-134a is used in new systems that are specially designed for its use. The common HFCs are:
R-134a
R-124

The 1997 Kyoto Protocol puts R-134a as one of the 6 greenhouse gases that must be reduced. There is no phaseout date for this refrigerant and it is expected to be highly used in the HVAC industry.

Refrigerant Blends
These air conditioner refrigerant are also known as "azeotropic" and"zeotropic". Their use is increasing as they are environmental friendly. The setback is that the total air conditioning systems production cost is higher. However, as more manufacturers switch to this type of refrigerants, the cost/unit will drop eventually. The common refrigerant blends used in the air conditioning industry are:
R-410A
R-407c
R-410A are used as a replacement refrigerant for residential air conditioning applications.
R-407C are used as R-22 replacement.

Recovery, Recycling and Reclaiming of Refrigerants
Laws have been passed to prevent the release of CFC refrigerants into the atmosphere. The steps taken are:

Recovery
The act of removing the refrigerant from a system and store it in an external container. No testing or processing is needed in any way.

Recycling
Refrigerant is cleaned for reuse by oil separation and passes though devices such as core filter-driers. This procedure reduce the moisture, matter and acidity of the refrigerant for reuse. It is usually done for jobs on the field or service shops.

Reclaiming
Reprocess the refrigerant to new product specifications which may include distillation process. This can only be done by manufacturing plants where chemical analysis is required. Highly equipped local service shops may have this facility as well.

Consumer Role
How can consumer like you play your part in the effect to keep our earth green? You can do that by purchasing air conditioning systems that uses new refrigerant such as R-134a, R-407C or R-410A. Most equipments are labelled with stickers that indicate the type of refrigerant used. Examples are "ozone friendly" sticker, "R-410A" sticker,..
Do your part to preserve mother nature...
(source from:http://www.airconditioning-systems.com/air-conditioner-refrigerant.html)

1 comment:

  1. In my opinion, 134a refrigerant is a widely used and efficient refrigerant that has been in use for several years. It has good thermodynamic properties and is widely considered to be a safe and effective replacement for CFCs.

    ReplyDelete